Author Topic: HP Reverb G2  (Read 3294 times)

0 Members and 1 Guest are viewing this topic.

Online Ubercat

  • Man-at-Arms
  • *****
  • Posts: 1852
Re: HP Reverb G2
« Reply #75 on: April 06, 2021, 04:34:43 AM »
It turns out that the connector wasn't fully inserted into the head set. I pushed and pushed and wiggled that damn thing and it wouldn't go in any further ... until it finally did after two days of trying. And I just figured it out mere minutes before having to turn off the PC and go to work.

Ridiculously poor design.  :tickedoff:
"We're going to need another redhead."

Offline Yskonyn

  • Global Moderator
  • Landsknecht
  • *****
  • Posts: 4109
  • The Flying Dutchman
    • Visit my blog: Yassy HQ for various things combat simulation.
Re: HP Reverb G2
« Reply #76 on: April 12, 2021, 02:34:14 AM »
The connector is quite stiff to get in but also prone to wiggle itself loose over time if you have some pressure on the cable from the side of the headset.
Make sure its seated correctly and make sure the cable has enough play when guiding it to the side and you should be fine.

@Jarhead, havent come across that suggestion yet. Will try.
"Pilots do not get paid for what they do daily, but they get paid for what they are capable of doing.
However, if pilots would need to do daily what they are capable of doing, nobody would dare to fly anymore.

Offline Jarhead0331

  • Judge Advocate General
  • Administrator
  • Arquebusier
  • *
  • Posts: 14524
  • Global Moderator, General Counsel, Heavy Weapons
Re: HP Reverb G2
« Reply #77 on: April 12, 2021, 05:55:54 AM »
Definitely let me know if you notice any improvement. You can never tell if its all in the imagination!
Grogheads Uber Alles
Semper Grog
"No beast is more alpha than JH." Gusington, 10/23/18